Set up your EcoLink or ProLink (LoRaWAN) Gateway

Your gateway will come pre-configured to work with any bluebots with the gateway’s range. When you receive your gateway, please test the network first thing (whenever possible) before installing the equipment out in field.  DO NOT perform a factory reset on the gateway or it will erase the pre-configured settings necessary for bluebot to cloud communication. In order to connect your mile-sight gateway for the first time please attach the antenna, unscrew the bottom of the case to access the ethernet port, or follow the setup procedure outlined by the manufacturer below to enable a Wi-Fi network connection-

How to Connect Milesight Gateway to the Internet 

Because your gateway has been pre-configured to work with your bluebots within range, you simply have to plug the gateway into power and either a working router, via ethernet, or connected to a network via data only SIM cards. Once your bluebots are connected to the gateway(s) successfully, the LED light on bluebot will go from flashing green to solid or flashing blue. If the light is flashing blue, please remember to set the zero point on your bluebot meter during set up. If you have any questions or need help with your gateway/bluebot connection, please connect with a member of our support team so we can help you get connected. Email us at support@bluebot.com