What's in the Box

Modified on Thu, 01 Feb 2024 at 11:53 AM


Each bluebot ships with everything needed to have a successful installation.





100-W (WiFi Meter)

● Wi-Fi bluebot smart flow meter
● 10ft (3m) USB-C power cable

● C-holders, replacement coupling pads
● Microfiber towel
● Sandpaper disc

 

LoRaPTP (Point to Point Meter with LoRa Bridge)
● The LoRaPTP bluebot smart flow meter
● The LoraPTP Bridge
● 10ft (3m) USB-C power cable to power the Meter
● 6ft (1.8m) USB-C power cable to power the Bridge
● 2x Antenna - one for Meter and one for Bridge
● C-holders, replacement coupling pads
● Microfiber towel
● Sandpaper disc

 

LoRaWAN-

● LoRaWAN bluebot smart flow meter
● 10ft (3m) USB-C power cable to power the Meter
● 1x Antenna for Meter
● C-holders, replacement coupling pads
● Microfiber towel
● Sandpaper disc

Gateway Box- 

● LoRaWAN Gateway
● 1x Antenna for Gateway
● Power cable
● Ethernet cable
● Mounting hardware
● 4G LTE Sim card (not included)



Visual Guide (100-W WiFi Meter)


bluebot device

bluebot device

(ultrasonic water meter)

10' USB-C power cable

(10 feet long, creates a press-tight water resistant fit.)

C-Holders
(Hold the bluebot clamps open to replace pads)

Ultrasonic Gel Pads

(Replacement Pads x5 used as needed)

Microfiber Towel
(For removing dirt, dust and debris from the pipe before installation)
Sand Paper Disc
(For sanding away house paint, dirt, or grime on your pipe)

Maintenance Items

The silver c-holders are used to prop the bluebot device clamps open during a pad replacement when pads are soiled or removed during installation by accident. The ultrasonic gel pads are helpful during inspection and replacement of your ultrasonic pads. Five sets of replacement pads are included. 


Installation Items

Below the bluebot device, you will find a square microfiber towel and a round sandpaper disc. During installation, we encourage you to install bluebot on a clean section of pipe for best results. Sanding away house paint, dirt, grime buildup, etc. from the pipe and cleaning with the microfiber cloth allows bluebot to have an even stronger ultrasonic signal at your location.


Missing Items?

If you're missing any items above for the Wi-Fi bluebot please reach out to us directly and we'll happily assist you with the correct items.


To obtain missing items Submit a Support Ticket




If you have any questions, please submit a support ticket or call (831)275-2715 and leave a message. A member of our support team will call you back within 24 hours.






Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article