Pairing your bluebot is a streamlined and easy process, using your iOS or android device.
When you begin, please initially connect your bluebot to your network while standing next to your router or gateway. You will not need to have the bluebot installed on the pipe to complete this step. Open the app go through the setup process. Make sure to connect to a 2.4GHz network in order for the bluebot to work properly. Once you have the bluebot connected to your network, its ok to unplug it and move it to the installation location. Please follow our installation guide HERE when choosing a location.
Step by Step instructions
-Push and hold the white button on bluebot next to the LED indicator light on bluebot.
-You will see a flashing green light, indicating the device is entering its pairing mode (AP Mode). Followed by a solid green light, indicating that the device is now in AP Mode.
-On your iOS or Android device with your bluebot water app open, in the upper right hand corner you will see a "+", tap the plus sign.
Follow the onscreen prompts through the app to complete the set up of bluebot.
If you have any questions, please submit a support ticket or call (831)275-2715 and leave a message. A member of our support team will call you back within 24 hours.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article